
|
Suspension Strips - Triangle Hole
The Single Sheet System uses self adhesive suspension strips. Strips are also called carrier strips, filing strips, drawing supports, mylar planhanging strips, adhesive plan strips, adhesive strips.
The strips are self adhesive and made of industrial strength polyester with Precut Triangle shaped holes. Using the strips documents are hung vertically in Trolleys or Wall Hangers.
Simple to apply. Peel of the adhesive protection and stick the strip along the top of the document being hung.
Strips will support up to 1kg in document weight. Fabricated to carry heavy loads the strips will not tear or become brittle. For laminates or heavier blueprint type documents, it is recommended two strips be used, one strip attached to each side of the document.
Each strip is 250 micron (.01 inches) thick. Strips should peel off laminates and good quality paper after use.
Strips come in 4 lengths and in packs of 100. They are also available in 50 metre and 100 metre rolls on request.
Peel off the protective layer from the adhesive and fix the strip to the edge of the sheet to be filed. Press firmly to fix the adhesive. Snap the strip onto the triangular bar. Ideal for sheets frequently accessed.
Strips hang on Trolleys and Wallhangers.

IMPORTANT NOTE:
Standard strips have Trianglar Holes at 170mm Centres. Other centre distances between holes available on request.

Specifications:
|
Model Size |
Length |
Hold Sheet Size |
Each Strip
Supports |
Each Pack |
Weight |
Volume |
|
|
mm |
Inches |
|
|
Contains |
Kgs |
Lbs |
|
|
SVAO |
841 |
33" |
841 x 1189
36" x 48" |
1 kg |
100 Strips |
1.4 |
3.0 |
.001 |
|
SVA1 |
594 |
24" |
594 x 841
24" x 33" |
1 kg |
100 Strips |
1.0 |
2.25 |
.001 |
|
SVA2 |
420 |
16" |
420 x 594 and smaller
16" x 24" |
1 kg |
100 Strips |
1.0 |
2.25 |
.001 |
|
SVA3 |
297 |
12" |
297 x 420
12" x 16" |
1 kg |
100 Strips |
1.0 |
2.25 |
.001 |
PLANHORSE IS THE DRAWING AND PLANFILING SOLUTION
|